- 1two cables support a weight of 300 n as shown belw find the tension in thw two c
two cables support a weight of 300 n as shown belw find the tension in thw two cables

- 2A 136 N bird feeder is supported by three cables as shown in the figure below. Find the tension...
A 136 N bird feeder is supported by three cables as shown in the figure below. Find the tension in each cable.right cable Nleft cable N

- 3Consider the 678 N weight held by two cables.The left-hand cable had tension T2 and makes an...
Consider the 678 N weight held by two cables.The left-hand cable had tension T2 and makes an angle of 52 with the ceiling. The right-hand cable had tension T1 andmakes an angle of 41 with the ceiling.

- 4Find the tension in both cables please!!!
A traffic engineer wants to suspend a 220-lb traffic light above the center of the right two lanes of a four-lane thoroughfare as shown. Points A and C are thesame height. The horizontal distance to the traffic light from the right hand support is 20 feet and the vertical distance the traffic light hangs down is 12 feet.Determine the tensions in the cables AB and BC.

- 5A 198.0-N bird feeder is supported by three cables as shown in the figure below. Find the...
A198.0-N bird feeder is supported by three cables as shown in the figure below. Find the tension in each cable.Left cable ______NRight cable______NBottom cable______N

- 6In a pulley sytem with 100% effieciency with ten support cables
In a pulley sytem with 100% effieciency with ten support cables. The input side reels 100 meters of cable. How far dis the output move? What is the value of the output force? In identical conditions at 70% efficiency, the cable does not stretch. How much input force is needed to perform same output work?

- 7In a pulley sytem with 100% effieciency with ten support cables
In a pulley sytem with 100% effieciency with ten support cables. The input side reels 100 meters of cable. How far dis the output move?What is the value of the output force?In identical conditions at 70% efficiency, the cable does not stretch. How much input force is needed to perform same output work?

- 8Tension in Cables
Three cables are joined at ring C. Determine the tensions in Cables AC and BC caused by the weight of the 30 kg cylinder.

- 9Tension in cables
A 18 loudspeaker issuspended2.0 below the ceiling by twocablesthat are each 20 from vertical. What is thetension in thecables( in Newtons)?Will rate lifesaver!

- 10two tension cables
Consider the 670 N weight held by two cablesshown below. The left-hand cable had ten-sion T2 and makes an angle of 42degrees with theceiling. The right-hand cable had tension T1and makes an angle of 40 degrees with the ceiling.What is the tension in the cable labeled T2slanted at an angle of 42 degrees?Answer in units of N

- 11What is the tension in each of the two cables?
A helicopter is lifting two crate simultaneously. One cable with a mass of 200.kg is attached to the helicopter by a cable. The second crate with a mass of 100.kgis hanging below the first crate and is attached to the first crate by a light cable. As the helicopter accelerates upward at a rate of 1.0 m/s2, whatis the tension in each of the two cables?

- 12The 665 N weight held by two cables
The 665 N weight held by two cables. The left-hand cable had tension T2 and makes an angle of 43 degrees with the ceiling. The right-hand cable had tention t1 and makes an angle of 48 degrees with the ceiling. What is the tension in the cable labeled t1 slanted at an angle of 48 degrees?